|
CATALOGUE NUMBERING SYSTEM*
FOR XECONEXTM IMPLOSIVE CONNECTORS
CONDUCTOR
TYPE
The first group of numbers indicates the type
of accessory.
Prefix
1XXX relates to Full Tension Joint
Can be prepared as a T-TAP: 1XXX-T
Prefix 2XXX relates to Dead
End Joint (a) (b) (c)
Prefix 3XXX relates to Jumper
Terminals (a)
Prefix 71XXX relates to Repair
Full Tension Joint (d)
Prefix 72XXX relates to Repair
Dead End Joint (a) (b) (c) (d)
Prefix 9XXX relates to Repair
Sleeve (e)
Can be prepared as a T-TAP: 9XXX-T
Prefix 19XX relates to Full
Tension Joint for Steel Wire
Prefix 29XX relates to Dead
End Joint for Steel Wire
The
second group of numbers indicates the conductor code.
For convenience, the catalogue includes the Code Name,
Stranding and the Size of each conductor.
Notes:
|
a
|
By
default, in this catalogue the angle of the NEMA pad is always 15¡.
Implo can supply non-standard Dead Ends and Jumper Terminals with a
NEMA pad other than 15¡, as required. This must be shown in the third
group of numbers as shown in the following example:
2142
Dead End for Penguin; 211.6 kcmil; 6/1; with NEMA pad at 15¡;
2142-0
Dead End for Penguin; 211.6 kcmil; 6/1; with NEMA pad at 0¡.
|
|
|
|
|
b
|
By
default, Dead Ends fittings have a single NEMA pad. Implo can supply
non-standard Dead Ends with a Double NEMA pad if required. This must be
specified by adding the letters "DN" as shown in the following example:
2142 Dead
End for Penguin; 211.6 kcmil; 6/1; single NEMA pad at 15¡;
2142-0-DN
Dead End for Penguin; 211.6 kcmil; 6/1; double NEMA pad at 0¡.
|
|
|
|
|
c
|
The
default Eyebolt on a Dead End fitting is Round Eye (type M or P). If
required, an Oval Eye Bolt can be supplied as well. This must be
specified by adding the letters F or C. See example numbering below.
|
|
|
|
|
Round Eyebolt (Default)
|
Oval Eyebolt
|
|
Type M for ULT strength up to 40 kps.
Type P for ULT strength up to 80 kps.
|
Type F for ULT strength up to 40
kps.
Type C for ULT strength up to 80 kps.
|
|
2142
Dead End for Penguin; 211.6 kcmil; 6/1; single NEMA pad at 15¡; Round Eyebolt
|
|
2142-0-F
Dead End for Penguin; 211.6 kcmil; 6/1; single NEMA pad at 0¡;
Oval Eyebolt
|
|
2059
Dead End for Rail; 954 kcmil; 45/7; single NEMA Pad at 15¡;
Round Eyebolt
|
|
2059-0-C
Dead End for Rail; 954 kcmil; 45/7; single NEMA pad at 0¡; Oval Eyebolt
|
|
d
|
Repair Joints are not shown in the catalogue.
Implo supplies these types of fittings in any length required. This
must be specified by adding the length of the fitting at the end of the
description. For the Repair Joint, this number indicates the damaged
length of the conductor as shown in the following example:
71142
Full Tension Repair Joint for Penguin; 211.6 kcmil; 6/1
72142-25
Dead End for Penguin; 211.6 kcmil; 6/1; to repair 25" damage on the
conductor
|
|
|
|
|
e
|
Repair Sleeve fittings are not shown in the
catalogue. The standard length of these fittings is 16", but length can
be up to 18". Repair Sleeves can be fabricated with a NEMA pad (T-TAP)
welded at 90¡ to the sleeve. Depending on the application, this T-TAP
can also be welded at 0¡ to the sleeve. See examples below:
9142
Repair Sleeve (RS) for ACSR Penguin; 211.6 kcmil; 6/1
9142-T Repair
Sleeve (RS) c/w T-TAP for ACSR Penguin; 211.6 kcmil; 6/1
9142-T(0)
Repair Sleeve c/w T-TAP at 0d for ACSR Penguin; 211.6 kcmil; 6/1
|
|
